Embroidery vs Screen Printing: Which Is Right for Your Company Apparel?

Embroidery vs screen printing comes down to the garment and how long it needs to last. Embroidery stitches your logo into the fabric with thread and suits polos, jackets and caps that staff wear for years. Screen printing (also called silkscreen) pushes ink through a mesh screen onto the fabric and suits T-shirts, large designs and bigger runs.

The Short Answer

Neither is better for everything: embroidery suits logos people wear for years, and screen printing suits large designs and big runs.

  • Choose embroidery for apparel that staff wear for years and that represents your company up close: polos, quarter-zips, jackets, button-downs, scrubs and caps.
  • Choose screen printing for T-shirts and event shirts, large designs such as a full back print, and bigger runs where a low price per piece matters most.
  • Use both when the order has both kinds of items: embroidered polos and jackets for staff, printed tees for events and giveaways.

At AllStar Logo, Print in the design studio is DTF (direct-to-film) printing, which handles full-color logos; the minimum is 12 pieces per order.

Sample mockup: embroidered YOUR LOGO on a navy hoodie, close-up
Embroidery: raised, stitched thread
Sample mockup: printed YOUR LOGO on a navy hoodie, close-up
Screen printing: flat, smooth ink
On this page
  1. Side by side
  2. Which for which garment
  3. Durability
  4. Costs at AllStar Logo
  5. Heat transfer and DTF
  6. FAQs

Screen Printing vs Embroidery: Side by Side

Embroidery Screen printing
Look Raised, textured thread with a premium feel Flat, smooth ink with bright, solid color
Feel Adds some weight and stiffness, most noticeable on thin fabric A layer of ink on the surface; large prints can feel heavy and less breathable
Durability Holds up to repeated washing; thread doesn’t crack or peel Lasts well when properly cured; can fade or crack after many washes
Detail Best for bold, simple logos; very small text and thin lines are hard to stitch Holds finer lines and smaller text
Gradients and photos Photos don’t stitch well; gradients only in simplified form Possible with halftone printing
Design size Usually small to medium: chest, sleeve, cap front; a large back design costs more stitches Small to very large: full front, full back
Best garments Polos, jackets, quarter-zips, fleece, button-downs, scrubs, caps, bags T-shirts, hoodies, sweatshirts, some performance tees
Main cost driver Stitch count and number of logo placements Number of colors, print locations and quantity
Setup Digitizing: a stitch file per logo, often a separate one per size One screen per color, per print location

AllStar Logo (legal name AllStar Marketing & Promotions) has been a Los Angeles company since 2001. We’re at 8715 Aviation Blvd, Inglewood, CA 90301, near LAX, where customers can visit, and we ship nationwide. We offer both embroidery and DTF printing.

How Embroidery Works

The logo is first digitized: the artwork becomes a stitch file that tells the machine where each stitch goes, in what direction and in what order. A backing (stabilizer) behind the fabric keeps it flat, and the machine sews the design, changing thread colors as it goes.

Stitch count sets most of the cost. A bigger or denser logo needs more stitches and more machine time. The number of colors matters less than in printing, because the machine changes threads automatically. A stitch file only scales a little, so a cap or full-back version of a logo is usually digitized as its own file. At AllStar Logo, the one-time $65 logo setup (digitizing) is per product and free on reorders, with no extra charge over 8,000 stitches unless the count is much higher. A cap-size or jacket-back version is a separate $65.

Sample mockup: embroidered YOUR LOGO on the front of a navy structured cap, close-up

How Screen Printing Works

In screen printing, each color in the design needs its own screen, and the colors are printed one at a time, lined up so they fit together. The ink is then cured with heat so it bonds to the fabric.

Screens take setup work, so a one-color logo costs less to set up than a four-color design. On dark garments, a white base layer is often printed first, which counts as an extra color. Once the screens are ready, each extra shirt is quick to print, which is why the price per piece falls as the quantity rises. This is the general method; AllStar Logo’s Print is DTF, which uses no screens.

Which Method for Which Garment

Polo shirts: embroidery

A left-chest logo stitched on a polo is the standard look for company apparel, and it suits piqué and performance knits. On lightweight performance polos, the digitizer adjusts stitch density and backing so the fabric doesn’t pucker around the logo. Printing can suit a large back design or full-color artwork. Shop custom polo shirts or printed polos.

Caps and beanies: embroidery

Embroidery is the standard for caps: a compact stitched logo suits the small front panel and stands up to sweat and daily wear. Structured caps hold a stitched logo crisp; on unstructured caps and knit beanies, keep the design small and bold. Screen printing on caps is mostly limited to flat foam-front trucker caps, and an embroidered patch is the other common way to get a stitched look. Shop custom caps.

Jackets and softshells: embroidery

Embroidery suits chest and sleeve logos on custom jackets, and AllStar Logo embroiders waterproof jackets too. A large back logo can be stitched, but the stitch count climbs quickly with size.

T-shirts: printing

For most tee orders, especially large front or back designs and event runs, printing gives the best look for the price. An embroidered left-chest tee is an option for a dressier look, but thin jersey needs the right backing so it doesn’t pucker. Shop printed T-shirts, or custom T-shirts for an embroidered left-chest tee.

Scrubs and lab coats: embroidery

Medical and dental offices usually put the practice logo on the left chest of scrubs and lab coats, often with the staff member’s name on the other side. Names are added as a text design with one $65 setup for the whole list, right-chest names included. Print (DTF) can also go on scrubs and lab coats. Shop medical wear.

Hoodies, sweatshirts and quarter-zips: either

Use embroidery for a left-chest staff look on hoodies and sweatshirts and quarter-zips, and printing for a big front or back design on printed sweatshirts. On high-pile fleece, small stitched details can sink into the fabric, so keep the logo bold.

Ordering several of these? Send us the list and your logo, and we’ll recommend embroidery or printing for each piece.

Durability and Washing

Embroidery usually lasts longer, because thread doesn’t crack or peel. A properly cured screen print holds up through many washes but can fade, crack or wear thin, especially with hot water and high dryer heat.

Follow the care label on the garment. Where the label allows, a few habits also help either method last:

  • Wash garments inside out in cold or warm water.
  • Skip bleach, and tumble dry on low or hang to dry.
  • Don’t iron directly on a print or on embroidery; iron from the reverse side.
  • On embroidered pieces, trim a loose thread instead of pulling it.

Detail and Color Limits

Embroidery works best with thick lines and bold lettering. As a rule of thumb, letters smaller than about a quarter of an inch tall tend to fill in, and gradients, shadows and photos don’t translate well into thread. Pick thread that contrasts with the garment: a white or light logo reads best on navy or black, and a dark logo on white or light gray. At AllStar Logo, thread can be matched to your Pantone (PMS) colors.

Screen printing holds finer lines, small text and halftones, which imitate shading with tiny dots. A one-color version of your logo is useful for both methods. At AllStar Logo, Print (DTF) logos can have unlimited colors, and small lettering is fine.

Sample mockup: the same logo embroidered and printed at a large size, a very small size and with a gradient; the tiny stitched lettering fills in and the gradient turns into bands of thread, while the print stays sharp

Minimums and Costs at AllStar Logo

In our design studio you choose Embroidery or Print for each item (customization help), and the price updates when you switch.

At AllStar Logo Embroidery Print (DTF transfer)
Method Stitched thread DTF (direct-to-film): printed on a film, then heat-pressed onto the garment
Minimum 12 pieces per order; mix and match any products, sizes and colors 12 pieces per order; mix and match any products
Logo setup One-time $65 per product, first logo side included; free on reorders Ask us: we confirm it on your quote.
Color matching Thread can be matched to Pantone (PMS) colors Ask us: we confirm it on your quote.
Proof and production Digital proof within 48 hours; production 5–7 business days after proof approval Ask us: we confirm it on your quote.

What you pay starts with the garment price. The price on a product card is per piece at 12 or more, and an embroidered logo adds no per-piece charge. Example garment prices for our best-selling polo:

Quantity 100% Cotton Pique Polo Shirt (B1014), per piece before logo setup
12–72 $16.72
73–144 $16.39
145–288 $16.05
289–575 $15.72
576+ $15.38

On top of the garment price:

  • Extra logo sides: each extra side (front, back, left or right) adds a one-time $65.
  • Names or text: a text-only design, such as a list of employee names or a phone number, is one $65 setup.
  • Rush: Rush delivers in 5 business days (+20%) and Super Rush in 4 (+40%), counted from proof approval with shipping time included, chosen on the product page.

To check fit first, order single blank samples (1 per size), with no logo. Sample prices vary by style and are not credited to the bulk order.

Embroidery vs Heat Transfer and DTF

A heat transfer is a printed design pressed onto the garment with heat. Direct-to-film (DTF) is a newer type of transfer that prints full-color designs without screens. Both suit small runs, detailed artwork and individual names or numbers, but they can crack or peel sooner than embroidery. Embroidered patches give a stitched look, woven patches hold finer detail, and either can be sewn or heat-applied to caps and jackets.

At AllStar Logo, Print in the design studio is DTF. Your design is printed in full color on a film and heat-pressed onto the garment, with no per-color screens, and the minimum is 12 pieces per order.

Get Your Logo Ready

  1. Send the best file you have. Any file format is accepted; a vector file (AI, EPS or PDF) works for both methods.
  2. Count your colors, and keep lines bold.
  3. Give us your Pantone (PMS) numbers so the thread can be matched to your brand colors.
  4. Pick the placement: left chest, sleeve, back or cap front.
  5. Approve the proof before anything is produced.
Sample mockup: digital proof of a polo showing the logo size, placement and thread colors, ready for approval

What AllStar Logo Offers

  • Company apparel and uniforms: polos, caps, jackets, T-shirts and work uniforms. AllStar Logo is an authorized dealer for every brand it sells.
  • Ongoing programs: an employee uniform program keeps approved styles per role, reorders, new-hire kits and name personalization in one place.
  • Local or nationwide: custom embroidery in Los Angeles for local businesses, or order online 24/7.

Embroidery vs Screen Printing FAQs

Should company polos be embroidered or screen printed?

Embroidery is the usual choice for company polos. A stitched left-chest logo looks professional, holds up to repeated washing and suits piqué and performance knits. Printing can suit a large back design or full-color artwork. At AllStar Logo, logo setup is a one-time $65 per product, first side included, and free on reorders.

Which lasts longer, embroidery or screen printing?

Embroidery generally lasts longer. The thread is sewn into the fabric, so it doesn’t crack or peel, and a stitched logo often lasts as long as the garment. A properly cured screen print also lasts through many washes, but the ink can fade or crack over time. Follow the garment’s care label; where it allows, washing inside out in cold or warm water and drying on low helps both last.

Is embroidery more expensive than screen printing?

It depends on the design and the quantity. For a small chest logo on a short run, embroidery is often close in price. A small logo needs few stitches, while a screen print spreads the cost of every screen over only a few shirts. For a large multi-color design on a big run of T-shirts, screen printing usually costs less per piece. The fairest comparison is a quote for embroidery and print on the same order.

What is the minimum order for embroidered or printed apparel at AllStar Logo?

AllStar Logo’s minimum is 12 pieces per order, and you can mix and match any products, sizes and colors to reach it. For example, 6 polos and 6 quarter-zips make a 12-piece order. A company store has no minimum, and store setup is $40 per item. Single blank samples can be ordered first, 1 per size. Sample prices vary by style and are not credited to the bulk order.

Is silkscreen the same as screen printing?

Yes. Silkscreen is an older name for screen printing, from when the mesh screens were made of silk; today they’re polyester. The comparison is the same: a silkscreen print is a flat, smooth layer of ink that suits large designs and bigger runs, while embroidery gives a raised, stitched logo that lasts.

Can I mix embroidered and printed items in one order?

Yes. Many companies combine the two: embroidered polos and jackets for staff, and printed T-shirts for events and giveaways. AllStar Logo offers both embroidery and DTF printing. In the design studio you choose print or embroidery for each item, or you can ask us to recommend a method for each piece.

Can a detailed or multi-color logo be embroidered?

Usually, yes, with some simplification. Thick lines and bold lettering stitch cleanly, while very small lettering, thin lines, gradients and photos don’t translate well into thread. At AllStar Logo, thread can be matched to your Pantone (PMS) colors, and a digital proof comes within 48 hours, so you approve any change to your logo before anything is produced.

How long does an embroidered order take at AllStar Logo?

AllStar Logo sends a digital proof within 48 hours, and nothing is produced until the proof is approved. Production takes 5–7 business days after proof approval, then the order ships, with no weekend shipping. Rush delivers in 5 business days (+20%) and Super Rush in 4 (+40%), counted from proof approval with shipping time included, both chosen on the product page.

What is the difference between embroidery and heat transfer?

Embroidery stitches the logo into the fabric with thread, giving a raised, textured finish that lasts. A heat transfer is a printed design pressed onto the surface with heat, and direct-to-film (DTF) is a newer full-color type. Transfers handle full color and individual names or numbers on small runs, but they can crack or peel sooner than embroidery, so embroidery is the more durable choice for staff apparel.

Not Sure Which Method Fits? Get a Quote

Tell us the items, quantities and logo, and we’ll recommend embroidery or printing for each piece.

AllStar Logo · 8715 Aviation Blvd, Inglewood, CA 90301 · 1-888-475-5646, Monday to Friday, 9am to 5pm Pacific · Online 24/7