Left Chest Logo Size and Placement: A Guide by Garment

A common left chest logo size is about 3–4 inches wide, and about 3.5 inches wide is typical. The right size for your logo depends on its shape, the garment and the decoration method, and the chart below gives a starting point for each garment.

The Short Answer

Many left chest logos end up about the size of a business card, 3.5 inches wide and 2 inches tall.

  • A left chest logo on a polo is commonly about 3–3.5 inches wide, slightly smaller than on a T-shirt.
  • An embroidered left chest logo is usually kept to 4 inches wide or less, while a printed one can go a little larger.
  • The height of a left chest logo follows its shape, so a wide logo stays short and a round logo is often sized smaller.
  • A left chest logo sits on the wearer’s left, commonly about 3–4 inches below the collar and 4–6 inches from the center of the shirt.
On this page
  1. Size chart
  2. Placement
  3. What changes it
  4. Embroidery or print
  5. Other placements
  6. Proof and fees
  7. FAQs

Left Chest Logo Size Chart by Garment

Common left chest logo sizes by garment, as general guidance. The figures come from published decorator size guides.
Garment or size Common logo width Good to know
Polo shirt About 3–3.5 inches wide Slightly smaller than on a T-shirt, so the logo clears the placket
T-shirt About 3–4 inches wide The usual range for adult sizes
Hoodie or sweatshirt About 3.5–4 inches wide Heavier fabric can carry a slightly larger logo
Jacket About 3–4 inches wide Keep the logo clear of zippers, pockets and seams
Adult sizes 2XL and up About 3.5–4 inches wide Often sized up so the logo does not look small
Youth sizes About 2.5–3 inches wide Scaled down to suit the smaller garment

Shop custom polo shirts or custom jackets.

Left Chest Logo Placement: Where the Logo Sits

Left chest means the wearer’s left, which is on your right when you face the person. A common guide puts the logo about 3–4 inches below the collar and about 4–6 inches from the center of the shirt. Decorators often measure another way: 7–9 inches down from the point where the shoulder seam meets the collar. The numbers differ because the starting points differ.

Sample mockup: light gray polo with YOUR LOGO on the left chest and two measuring lines, one down from the collar and one across from the center to the middle of the logo
The two measuring lines: down from the collar, and across from the center of the shirt.
  • On a polo, the logo is kept clear of the button placket.
  • On a shirt with a chest pocket, the logo usually goes on the pocket or just above it.
  • The right chest mirrors the left at the same size and is the usual place for a name.

What Changes the Size of Your Logo

Logo shape

A wide logo usually goes to the top of the range, and a round or square logo to the lower end, about 2.5–3 inches wide. A tall or stacked logo is limited by its height instead. Many left chest logos end up about the size of a business card, so holding a card against a shirt is a quick way to see the size.

Sample mockup: YOUR LOGO on a light gray polo chest beside a blank business card of the same size
A logo beside a business card.

Small lettering

Small lettering often decides the size, because embroidered letters smaller than about a quarter of an inch tall tend to fill in. If the smallest text in your logo falls below that, make the logo larger or simplify the text.

Garment size

Some shops use one logo size across a whole order, and others scale it. Larger adult sizes often get a slightly larger logo and youth sizes a smaller one, as the chart shows. If your order runs from small to very large sizes, ask whether the logo will be one size or scaled.

Fabric weight

Heavier garments can carry a slightly larger logo, as the hoodie row in the chart shows. On a lightweight polo or performance shirt, a large stitched logo can pucker the fabric, so stay at the smaller end of the range.

Left Chest Embroidery Size and Print Size

  • Embroidered: often about 2.5–3.5 inches wide, and usually kept to 4 inches wide or less so the stitching stays clear.
  • Printed: commonly about 3–4 inches wide, and some print guides allow up to about 4.5 inches wide.

For a full comparison of the methods, see embroidery vs screen printing.

Logo Sizes for Sleeves, Backs and Caps

Sample mockup: back of a light gray polo and a cap with outline boxes on the sleeve, back collar, full back, cap front and cap side
The other placements: sleeve, back collar, full back, cap front and cap side.
Common sizes for other placements, again as general guidance.
Placement Common size
Right chest The same size as the left chest
Pocket About 3–3.5 inches wide, on or just above the pocket
Sleeve About 2–3 inches wide
Back collar About 2–3 inches wide
Full back About 10–14 inches wide
Cap front About 2–2.25 inches tall and 4–5 inches wide on a structured cap
Cap side About 1–1.25 inches tall and 2–2.5 inches wide

For hats, see custom caps.

Your Logo Proof and Setup at AllStar Logo

AllStar Logo has been a Los Angeles company since 2001. We offer both embroidery and DTF (direct-to-film) printing.

  • Proof. We send a digital proof within 48 hours showing the logo size and placement, and nothing is produced until you approve it.
  • Design studio. In our design studio you can place, move and resize your logo on the product photo (customization help).
  • Small text. Small lettering is fine in our DTF printing.
  • Setup fee. Our one-time $65 logo setup per product includes one side: the whole front, the back or a sleeve. A second logo on the same side adds nothing. We add a one-time $65 for each extra side, for text, and for your logo in different colors for another garment color, even on the same side.
  • Larger embroidered logos. Up to 8,000 stitches are included in our logo setup, and a larger design is quoted normally, with no extra charge unless the stitch count is much higher.

See how much embroidery costs.

Want a price? Send us the style numbers and the quantities.

Left Chest Logo Size FAQs

How big should a left chest logo be?

A left chest logo is commonly about 3–4 inches wide, and about 3.5 inches wide is typical. Embroidered logos often run a little smaller, about 2.5–3.5 inches wide. The height follows the shape of the logo, so many left chest logos end up about the size of a business card: 3.5 inches wide and 2 inches tall.

What size should a logo be on a polo shirt?

A left chest logo on a polo shirt is commonly about 3–3.5 inches wide, slightly smaller than on a T-shirt, so it stays clear of the button placket. Polo shirt logo placement is commonly the wearer’s left chest, about 3–4 inches below the collar and 4–6 inches from the center, with any name on the right chest.

What size is a pocket logo?

A pocket logo is a left chest logo placed where a chest pocket is or would be. On a shirt with a pocket, a common pocket logo size is about 3–3.5 inches wide, and the logo goes on the pocket or just above it. Measure the pocket before you choose a size.

Is a left chest logo the same size on every garment size?

It varies: some shops use one left chest logo size across a whole order, and others scale it. Size guides often list about 3.5–4 inches wide for adult 2XL and up and about 2.5–3 inches wide for youth sizes. If your order spans many sizes, ask whether the logo will be one size or scaled.

What size should a logo be on a hat?

Hat logo size is limited by height, because a cap front is short and curved. On a structured cap, a front logo is commonly about 2–2.25 inches tall and 4–5 inches wide. Unstructured, low-profile caps take a smaller logo. A side logo is commonly about 1–1.25 inches tall and 2–2.5 inches wide.

What is a common logo size on the back of a shirt?

A full back logo on a shirt is commonly about 10–14 inches wide. A small logo under the back collar is commonly about 2–3 inches wide. Jacket backs differ from style to style, so check the size on your proof before you approve it. At AllStar Logo, the back is one side, and each extra side adds a one-time $65.

Get a Quote for Your Logo Apparel

Send us your logo, the style numbers and the quantities, and we’ll price the whole order, setup included.

AllStar Logo · 8715 Aviation Blvd, Inglewood, CA 90301 · 1-888-475-5646, Monday to Friday, 9am to 5pm Pacific · Online 24/7